Front End Suspension Rebuild Kit Compatible with Chevrolet 2WD C10 1/2 Ton Pickup/Suburban Idler Arm OEM Spec Replacements (17 Piece Kit)

This Kit is constructed using High-Quality OEM spec replacements compatible with 1968, 1969, and 1970 Chevrolet 2WD C10 1/2 Ton Pickups and Suburbans. These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Shaft Kits (2 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.

• YEARS: 1968, 1969, and 1970
• MODELS: Compatible with Chevrolet 2WD C10 1/2 Ton Pickup Suburban
• HIGH-QUALITY: OEM spec replacements
• INCLUDED IN THE 17 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (4 Each)*** 28.7 mm (1.13 Inches) (2 - To Frame and 2 - To Lower Control Arm or Axle), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Shaft Kits (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Idler Arm
• ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.